| (A) DOWNLOAD THE
CISCO SOFTWARE |
| |
Ignore this section (A) if you
have already received a CD-ROM from Catsoft. The CD-ROM contains the Cisco
software - VPN.exe.
|
|
| Step 1: |
Click here to download the Cisco
software: VPN.exe |
|
| |
|
|
| Step 2: |
After step 1, a window (shown
below) will appear. Click on the Save
button. |
|
| |
 |
|
| |
|
|
| Step
3: |
After step 2, a
window will again appear (shown below). Ensure the
field titled Save In: is pointing to
Local Disk (C:) Then, click on the Save
button. |
|
| |
 |
|
| |
|
|
| Step 4: |
After step 3, the file - VPN.exe
- will be saved to the C: drive on the PC. |
|
| |
|
|
| (B) INSTALL THE
CISCO SOFTWARE |
| Step
1: |
On the MS Windows
desktop, click on the
button. |
|
| |
|
|
| Step 2: |
After step 1, select the menu item
titled: Run... |
|
| |
|
|
| Step
3: |
After step 2, a
window will appear (shown below). For the field titled
Open: type in C:\VPN.exe and click on
the OK button. |
|
| |
 |
|
| |
|
|
| Step
4: |
After step 3, a
window (shown below) will appear. Click on the Unzip
button. |
|
| |
 |
|
| |
|
|
| Step
5: |
After step 4, the
Cisco files will be copied to the C:\WINDOWS\TEMP
folder. |
|
| |
|
|
| Step
6: |
After step 5, on
the MS Windows desktop, click on the
button again. |
|
| |
|
|
| Step 7: |
After step 6, select menu item
entitled: Run... |
|
| |
|
|
| Step
8: |
After step 7, a
window will appear (shown below). For the field titled
Open: type in C:\WINDOWS\TEMP\SETUP.exe and click on the OK
button. |
|
| |
|
|
| Step
9: |
After step 8, the
Cisco installation process will begin. During the installation process
appropriate instructions will be prompted to navigate you through the
installation process.
|
|
| |
|
|
| (C) IMPORTANT
NOTES |
| |
|
|
| Note 1: |
Issue:
Applicable to MS Windows XP only;
Message you will encounter:
Hardware Installation:
Cisco system VPN adapter has not passed Windows Logo testing to verify its
compatibility with Window XP.
Continuing your installation of this software may impair or
destabilize the correct operation of your system either immediately or in
the future. Microsoft strongly recommends that you stop this installation
now and contact hardware vendor for software that has passed Windows logo
testing.
What should you do:
Click on the button titled: Continue to complete
the installation process.
|
|
| |
|
|
| Note 2:
|
After installation, should you
still encounter any difficulties during VPN authentication i.e. any Cisco
VPN error reported, please contact the ATO Helpdesk for further
assistance.
|
|
| |
|
|
|
(D) OBTAIN THE
NEW LOGIN INFORMATION |
| |
Ignore this section (D) if you
have already received these information from the ATO. |
|
| |
|
|
| Step 1: |
Contact the ATO
to first obtain the Cisco VPN login identification information. The VPN
identification consist of: 1. VPN Login ID and
2. VPN Login Password. The VPN Login ID consist of 6 characters and
start with the initial V. |
|
| |
|
|
|
(E) SETUP THE NEW LOGIN INFORMATION IN TAXCAT |
| |
|
|
| Step 1: |
On the MS
Windows desktop, click on the
button. |
|
| |
|
|
| Step 2: |
After step 2,
click on the menu titled: Programs
Then, select the folder titled: Catsoft
Suite |
|
| |
|
|
| Step 3: |
After step 2,
select and click on the the program icon titled:
Taxcat 2003 |
|
| |
|
|
| Step 4: |
On the Taxcat
2003 main screen, click on the top menu titled:
Setups
Then, select the sub-menu titled:
Directory & System Details |
|
| |
|
|
| Step 5: |
After step 4, a
window will appear (shown below). Select the tab titled:
System Default.
Then, click on the option titled:
Apply DIS 11 transmission |
|
| |
|
|
| Step 6: |
After step 5,
press the button titled: F4 Save |
|
| |
|
|
| Step 7: |
After step 6, on
the Taxcat 2003 main screen, click on the top menu titled:
Setups
Then, select the sub-menu titled:
Communication Setup |
|
| |
|
|
| Step 8: |
After step 7, a
window screen will appear (shown below). Enter the
VPN Login ID and VPN Login Password obtained from the ATO to
these fields titled:
VPN Username: and VPN password: |
|
| |
|
|
| Step 9: |
After complete
entering the details in the Communication screen (shown above), press the
F4 Save button. |
|
| |
|
|
| |
Important notes
for the setup:
- if you are using a dial-up Internet Service Provider, ensure the
dialup connection is properly setup prior to setting up the details in
the
communication screen;
- it is not mandatory to use the Telstra ELS Dial-IP for the new ELS
lodgments program; Please make sure the conditions associated with
the Telstra Dial-IP if you intend to use it; check with the ATO;
- Ensure you tick the option titled:
Use ATO Telstra Dialup? if
you intend to use the ATO Telstra Dial-IP;
- If your internet connection is either ADSL, Cable or any direct
connection, check the option titled:
Apply direct internet
connection
- Always enable the option titled:
Automate VPN login
- For MS Windows XP user, enable the option titled:
Tunneling IPSec
over UDP
if you encounter any connection problems;
|
|
| |
|
|